gashilt.blogg.se - Mosquito magnet pro 1000mm owners manaul

Mosquito magnet pro 1000mm owners manaul code#

While holding the adapter in place, screw the Quick Clear cartridge into the Quick Clear adapter.

First hand-screw the Quick Clear adapter onto the valve.Remove protective cap from easy Quick Clear valve in the back of the trap.Close the propane tank valve by turning to the "off" position.Shut down your mosquito trap and let the fan run until it stops.Re-attach the regulator and try again.įuel line may be blocked by propane contaminates.

Mosquito magnet pro 1000mm owners manaul code#

*If gas empty code shows, press the off button, close the tank valve, and remove the regulator from the tank.

Turn the knob as far as possible by hand.

Propane tank may be empty or may need to be purged. The tank regulator isn't fully engaged.Make sure the regulator is fully engaged, and propane tank valve is fully open. Mosquitoes are not active in this climate wait until the temperature is consistently above 50 degrees F (10 degrees C) before starting your Mosquito Magnet mosquito trap. The outdoor temperature is below 50 degrees F. Is there a loose connection? Make sure your regulator is fully engaged, and propane tank valve is fully open on mosquito traps. Make sure you are using the correct power requirements for your unit. Is the power cord plugged in? Verify all electrical connections. Disconnect the regulator from the tank and reconnect. If the tank has been opened too quickly, security check valve might have triggered.

Hint: If you have another propane powered device operating on a standard, 20lb propane tank, try hooking that tank up to the trap to verify that the issue is with your tank. Has it been purged? Take propane tank to filling location. If the propane tank is new, it may have air blockage. Weigh tank against "empty" weight written on tank. Mosquito Magnet Trobleshooting Problem Mosquito Magnet won't start